Finding route...

Handlebar Remote Controller

Remote 2Bracket Edition

Our best remote, now with a bracket — mount the remote above or below your motorcycle stock button cluster. Adjust position and angle!

  • The same Remote 2 inside: multi-sensitivity 360 degree map panning, the easy access 2 way zoom switch and two buttons you set up with your favorite functions.
  • Made for motorcycles where there is no room next to the grip — the metal bracket clamps to the handlebar and puts the remote right where your thumb wants it.
Remote 2Bracket Edition

Adjust position and angle

Above or Below the Cluster

Above or Below

The bracket clamps to the handlebar and holds the remote above or below the stock button cluster — wherever your thumb lands naturally.

Adjust the Position

Slide the remote along the slotted arm to set how far it sits from the grip, then lock it in place.

Adjust the Angle

Rotate the remote on its pivot to match the angle of your hand, so the joystick and buttons face you.

Metal Bracket

A metal bracket with a solid handlebar clamp — tighten it once and it stays put, off-road included.

Above or Below the Cluster

When the grip area is full

No Room Next to the Grip?

The regular Remote 2 was designed to sit right next to the grip, standing at only 2cm wide. Some motorcycles simply don't have that space — heated grip controls, cruise control, a big switch cube or the hand guard clamp take all of it.

The Bracket Edition is the answer: the same remote comes on a metal bracket that clamps to the handlebar and holds it above or below the stock button cluster. Still within easy reach of your thumb, and every stock control stays accessible.

Have room next to the grip? Then the regular Remote 2 is the one to get.

Regular Remote 2 →

No Room Next to the Grip?

Made for the handlebar

Plug & Play

Data Over Cable

DMD devices have a specific communication channel for remote controllers, no BT required.

No Batteries

Both 12V or 5V supported, connect to a DMD device harness or directly to motorcycle 12V — the cable with connector to open wires is included.

Bluetooth

Communication over Bluetooth available for non DMD devices, works with any Android device.

Compatibility

Works with many navigation apps, everyday more developers are adding support for our remotes.

Plug & Play

Once you try it

Addictive

We assure you that once you navigate with our remote controller you will never want to go back to riding without it.

Accessing the most crucial navigation functions while riding is a game changer, quickly zoom in and out, quickly pan the map to search for alternative paths, toggle follow modes or control the GPX recorder, DMD² was made from the ground to be used with remote controllers, and you will feet it.

The remote itself is the same Remote 2, standing at 2cm wide and 2cm tall — the bracket simply moves it to where your motorcycle has room, still easy to reach with your thumb when riding and still allowing you to reach the stock instruments.

Certification:

  • CE / WEEE / REACH
  • UKCA
  • FCC / IC
  • RCM
Addictive

Android + Play Store

Compatible Apps

The DMD Remote 2 Bracket Edition works with many navigation apps, and every day more developers are adding support for it.

Google Maps icon Google Maps
OSMAnd icon OSMAnd
Locus Maps icon Locus Maps
GPX Viewer icon GPX Viewer
Rally Navigator icon Rally Navigator
Rally Moto icon Rally Moto
Waze icon Waze
Tom Tom Go icon Tom Tom Go
Gaia GPS icon Gaia GPS
Piste Roadbook icon Piste Roadbook
Kurviger icon Kurviger
Terra Pirata Roabook icon Terra Pirata Roabook
Guru Maps icon Guru Maps
Topo GPS icon Topo GPS

Carefully crafted

Metal Bracket, Off-Road Ready

A metal bracket with the handlebar clamp on one end and the remote on the other. The slotted arm sets the position, the pivot sets the angle — tighten the clamp and the pivot and the remote sits exactly where you want it, above or below the stock cluster.

Fully waterproof and dust proof: every button, switch and joystick is sealed against the elements, and all internal electronics are protected under a resin like layer. No external components — a single waterproof cable for communication and power, 5V or 12V.

Injected plastic chassis for the remote, metal for the bracket, all originally designed by DMD Navigation.

Metal Bracket, Off-Road Ready

Your remote, your rules

Setup Each Key

DMD² allows you to set the function for each of the remote keys.

  • Map Panning
  • Zoom in and out
  • Toggle Follow Location
  • Quick Save Locations
  • Control the GPX Recorder
  • Toggle Screen Lock
  • And much, much more...
Setup Each Key

Get yours

Where to Buy

You can buy any of our products directly from us, check our EU online shop - Thork Racing, or you can buy from any of the dozes of resellers that we have worldwide.

If you are outside EU we specifically advise to purchase only from our resellers!

Thork Racing
Buy @ our EU Store Thork Racing Buy Now
DMD resellers worldwide
Buy @ DMD Reseller Where To Buy Check Resellers
Top